3 PHASE 32 AMP 4 PIN 415 VOLT SY EXTENSION LEADS
3 PHASE 32 AMP 4 PIN 415 VOLT EXTENSION LEADS
These 3 Phase extension leads are suitable for use with 400/415V tooling, compressors, welders, generators and many other 3 phase applications.
All extension leads in this range include an industrial grade heavy duty 32 amp 4 pin plug and socket (connector).
Cable Specification
4.0mm2 is used for our 32 amp leads. 4 core or 5 core cable would be used depending on the amount of pins the lead has. 4 pin would be a 4 core (3Pin+Earth) and 5 pin would be a 5 core (3Pin+Neutral+Earth).
Available in 5, 10, 15, 20 or 25 metre lengths
All our leads are assembled by qualified electricians and PAT tested by an independant electrical company.
PAT test results are supplied with each lead.
SY CABLE
Due to the mechanical strength provided by their galvanised steel wire braid (GSWB), SY cables are widely used in industrial applications as interconnecting cables in control equipment or machines where they are subjected to medium mechanical stresses. These flexible instrumentation cables can be used in installations where free movement is required without tensile stresses and without forced guidance systems.
SY cables, also known as armoured flexible control cable, shielded flex, or simply armoured flex, are strong and durable cables suitable for internal dry, damp or wet environments (including oil-water mixtures), and can be used outdoors when protected against direct sunlight.
Specifications
· Conductor: Class 5 flexible copper conductor
· Insulation: PVC (Polyvinyl Chloride) Type TI2
· Bedding: PVC (Polyvinyl Chloride) Type TM2
· Braiding: GSWB (Galvanized Steel Wire Braid) minimum coverage of braiding shall be 50%
· Sheath: PVC (Polyvinyl Chloride) Type TM2
· Voltage Rating: 300/500V
· Operating Temperature: -15ºC to +70°C
· Minimum Bending Radius: 10 x overall diameter
 |
